Buy vbv.be ?
We are moving the project
vbv.be .
Are you interested in purchasing the domain
vbv.be ?
domain@kv-gmbh.de · 0541-91531010
Buy vbv.be ?
How do you convert kWh/kWp to W/m?
To convert kWh/kWp to W/m², you need to consider the following steps. First, convert kWh to watts by multiplying by 1000. Then, divide the result by the peak power in kWp to get the energy yield in watts per peak watt. Finally, divide this value by the area of the solar panel in square meters to get the energy yield in watts per square meter. **
How did Kafi M and Kafi W mate yesterday?
Kafi M and Kafi W mated yesterday through a process called copulation. This involves the male transferring sperm to the female's reproductive system, typically through the insertion of the male's intromittent organ into the female's cloaca. This allows for fertilization of the female's eggs, leading to potential offspring. This mating behavior is common among many bird species, including Kafis. **
Similar search terms for Hertz-HTX-8-M-FL-W
Top-Angebote
Products related to Hertz-HTX-8-M-FL-W:
-
Hertz HTX 8H S-FL-GThe Hertz HTX 8H S-FL-G is an 8-inch marine enclosure speaker with an RMS power handling of 200 watts and a peak power handling of 400 watts. The system's impedance is designed for 4 ohms, with a frequency response covering a range from 45 Hz to 25 kHz. Both the woofer and the tweeter are equipped with ferrite magnets that have a high flux density. The diaphragm is made of water-resistant, pressed paper, while polyamide is used for the dome. Technical features include Common Motor Compression Driver technology and a FEM-optimized waveguide. An integrated, sealed crossover features a resettable semiconductor tweeter protection circuit. Features 8-inch (20cm) marine enclosure speaker Power: 200 watts RMS Power: 400 watts peak Impedance: 4 ohms Water-resistant diaphragm made of pressed paper Polyamide dome Common Motor Driver technology FEM-optimized waveguide Waterproof, acoustically transparent dust cover Long-stroke 51 mm voice coil in the woofer Integrated, sealed crossover Technical Specifications Frequency response: 45 Hz - 25 kHz Sensitivity: 98 dB SPL Mounting depth: 288 mm Dimensions (A x B x C x D): 225 mm x 308.2 mm x 231 mm x 6 mm Magnet size woofer: 140 x 62 x 22 mm Weight per speaker: 12.6 kg Xmech: 8.3 mm DC resistance (Re): 3.3 ohms Inductance (Le): 0.28 mH Equivalent volume (Vas): 10 l Moving mass (Mms): 20.5 g Compliance (Cms): 0.15 mm/N Drive factor (BL): 9 T*m584,85 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8H S-FL-SWThe HTX 8H S-FL-SW from Hertz is an 8-inch marine enclosure speaker with an RMS power handling of 200 watts and a peak power handling of 400 watts. The system operates with an impedance of 4 ohms and covers a frequency range of 45 Hz to 25 kHz. The construction includes ferrite magnets with high flux density and a water-resistant diaphragm made of pressed paper. An integrated, sealed crossover as well as long-stroke 51 mm voice coil woofers are part of the technical features. The sensitivity is rated at 98 dB SPL. The enclosure has a depth of 288 mm and a total weight of 12.6 kg per speaker. Features 8-inch (20 cm) marine enclosure speaker Power handling: 200 watts RMS Power handling: 400 watts peak Impedance: 4 ohms Common Motor Driver technology Water-resistant diaphragm made of pressed paper Long-stroke 51 mm voice coil woofer Integrated, sealed crossover Resettable semiconductor tweeter protection circuit Waterproof, acoustically transparent dust cover FEM-optimized waveguide Ferrite magnets with high flux density Polyamide dome Technical Specifications Frequency response: 45 Hz - 25 kHz Sensitivity: 98 dB SPL Depth: 288 mm Weight: 12.6 kg Woofer magnet size: 140 x 62 x 22 mm Xmech: 8.3 mm D: 166 mm Re: 3.3 ohms Le: 0.28 mH Vas: 10 l Mms: 20.5 g Cms: 0.15 mm/N BL: 9 T*m Dimension A: 225 mm Dimension B: 308.2 mm Dimension C: 231 mm Dimension D: 6 mm563,87 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8 M-CL-CHTX 8 M-CL-C is an 8-inch (200 mm) marine enclosure speaker from Hertz in coaxial design with 100 W RMS, 200 W Peak, 4 Ohm, and a frequency response of 45–25,000 Hz. The clamp mount is made of stainless steel 316 and fits round pipes of 38–76 mm as well as square profiles; rubber inserts serve to dampen vibrations. Q-OS² technology allows for alignment in 18 steps of 20° each, a quick mechanical/electrical release, and a multipole high-current connection in the clamp structure. The RGB LED front lighting is integrated into the front grill; the rear RGB lighting is optional via the accessory HTX RGB LOGO.1 in black or white. An adjustable logo at the front and back can be aligned in 64 steps. The 32 mm long-stroke woofer uses a polypropylene diaphragm with UV inhibitors and a flux ferrite magnet, while the tweeter relies on neodymium with a 36 mm diaphragm and a 20 mm voice coil. Protection class IP65 as well as the standards ASTM-D4329 (UV resistance) and ASTM-B117 (salt mist) are met, the enclosure has a depth of 288 mm, and a speaker weighs 5.4 kg. Features 8-inch marine enclosure speaker Hertz Pure Marine Certified, IP65, ASTM-D4329 UV resistance, ASTM-B117 salt mist Stainless steel 316 clamp mount, for round 38–76 mm and square profiles, rubber inserts for vibration damping Q-OS² technology: 18 alignment steps of 20°, quick mechanical/electrical release, multipole high-current connection Integrated RGB LED front lighting; optional rear RGB lighting via HTX RGB LOGO.1 (black/white) Adjustable front and rear logo, 64 steps Dedicated 8-inch coaxial design: 32 mm long-stroke woofer with polypropylene diaphragm (UV inhibitors); neodymium tweeter Woofer magnet flux ferrite with high density; tweeter magnet neodymium Weight per speaker 5.4 kg Technical Specifications Size 200 mm RMS power 100 W Peak power 200 W Impedance 4 Ohm Frequency response 45–25,000 Hz Sound pressure level 91 dB Depth 288 mm Tweeter diaphragm 36 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Xmech ±8.5 mm Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size 19.7 x 3 mm D 174 mm Re 3.4 Ohm Fs 51 Hz Le 0.46 mH Vas 26.1 l Mms 30 g Cms 0.33 mm/N Bl 6.33 T·m Qts 0.78 Qes 0.82 Qms 14.7 Dimensions A 225 mm Dimensions B 288 mm Dimensions D 50 mm Dimensions G 38–76 mm Dimensions H 12 mm710,28 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8 M-CL-TCHertz HTX 8 M-CL-TC is an 8 inch marine enclosure speaker with RGB LED lighting, clamp fastening made of 316 stainless steel, and Q-OS² technology. The front RGB lighting is integrated into the grille; a rear RGB lighting is available as HTX RGB LOGO.1 add-on in black or white. The tower can be aligned horizontally in 18 steps of 20° each, the logo is adjustable in 64 steps. The clamp structure integrates a multi-pole high current connection and rubber inserts for vibration damping and fits round 38–76 mm as well as square pipe profiles. Certification according to IP65, ASTM-D4329, and ASTM-B117. Coaxial design with 32 mm long-stroke woofer with polypropylene membrane and UV inhibitors as well as neodymium tweeter. Rated power handling 100 W RMS, 200 W peak, impedance 4 Ohm, frequency response 45–25,000 Hz, depth 288 mm, weight 5.4 kg. Features 8 inch marine enclosure speaker Manufacturer: Hertz RGB LED lighting at the front of the grille; rear RGB lighting optional via HTX RGB LOGO.1 in black or white Clamp fastening made of 316 stainless steel, suitable for round and square profiles Q-OS² technology Quick Orientation & Release for Sound & Safety Horizontal alignment in 18 steps of 20° each Adjustable logo in 64 steps Multi-pole high current connection integrated in the clamp structure Rubber inserts for vibration damping Suitable for round pipes 38–76 mm as well as square pipes or roof mounting Hertz Pure Marine Certified: IP65, ASTM-D4329, ASTM-B117 Coaxial system with 32 mm long-stroke woofer, polypropylene membrane with UV inhibitors Neodymium tweeter Size 200 mm Depth 288 mm Weight 5.4 kg Power handling RMS 100 W Power handling peak 200 W Impedance 4 Ohm Frequency response 45–25,000 Hz Technical specifications Size 200 mm Power handling RMS 100 W Power handling peak 200 W Impedance 4 Ohm Depth 288 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Frequency response 45–25,000 Hz Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size 19.7 x 3 mm Weight of a speaker 5.4 kg Woofer magnet flux ferrite with high density Tweeter magnet neodymium Membrane polypropylene with UV inhibitors Xmech ±8.5 mm D 174 mm Re 3.4 Ohm Fs 51 Hz Le 0.46 mH Vas 26.1 l Mms 30 g Cms 0.33 mm/N Bl 6.33 T·m Qts 0.78 Qes 0.82 Qms 14.7 SPL 91 dB A 225 mm B 288 mm D 50 mm G 38–76 mm H 12 mm710,28 €*Shipping: 0,00 €Secure redirect to the provider
-
What do the symbols M and W mean on Timberland Boots?
The symbols M and W on Timberland Boots stand for Men's and Women's, respectively. These symbols indicate the gender for which the boots are designed and sized. Men's boots typically have a wider width and larger size range compared to Women's boots. It is important to pay attention to these symbols when purchasing Timberland Boots to ensure the best fit and comfort. **
-
How can the letters w m x g x h be rearranged?
The letters w m x g x h can be rearranged in various ways. One possible arrangement could be "w x m x g x h" or "m x w x g x h". Another arrangement could be "h x g x m x w". The key is to mix up the letters while maintaining their original sequence within the rearranged set. **
-
Are 8 cats too many in an 80 m² apartment?
Yes, 8 cats would likely be too many for an 80 m² apartment. Cats need space to move around, play, and have their own territory. With 8 cats in a relatively small space, there may be increased competition for resources, potential territorial issues, and an overall decrease in the cats' quality of life. It's important to consider the well-being of the cats and ensure they have enough space to live comfortably. **
-
What is the difference between 60 Hertz and 75 Hertz?
The difference between 60 Hertz and 75 Hertz lies in the frequency of the alternating current. Hertz is a unit of frequency, and it measures the number of cycles per second. Therefore, 60 Hertz means the current changes direction 60 times per second, while 75 Hertz means it changes direction 75 times per second. In practical terms, a higher Hertz value can result in a smoother and more responsive display on electronic devices such as monitors and TVs. **
What is the PayPal authentication 8?
The PayPal authentication 8 is a security feature that adds an extra layer of protection to PayPal accounts. It is a two-factor authentication method that requires users to enter a unique 8-digit code in addition to their password when logging into their account. This code is typically sent to the user's mobile phone or generated by a security token. The authentication 8 helps prevent unauthorized access to PayPal accounts and adds an extra level of security to the login process. **
Does the 165 Hertz monitor only go up to 100 Hertz?
No, a 165 Hertz monitor does not only go up to 100 Hertz. A 165 Hertz monitor is capable of displaying refresh rates up to 165 Hertz, providing smoother and more responsive visuals compared to lower refresh rate monitors. Users can adjust the monitor settings to select the desired refresh rate, up to the maximum of 165 Hertz. **
Top-Angebote
Products related to Hertz-HTX-8-M-FL-W:
-
Hertz HTX 8 M-FL-WHertz HTX 8 M-FL-W is an 8 inch 200 mm marine enclosure speaker with flat mount option. Rated for 100 W RMS and 200 W peak at 4 Ohm impedance and a frequency response of 45 to 25,000 Hz. Constructed with impact-resistant and UV-resistant material as well as polypropylene diaphragm with UV inhibitors. Woofer with high density flux ferrite magnet and 32 mm voice coil, tweeter with neodymium magnet, 36 mm diaphragm and 20 mm voice coil. Xmech is ±8.5 mm. Adjustable logo and front RGB LED lighting in the grille, rear RGB LED optional via HTX RGB LOGO.1 in white or black. Dimensions A 225 mm, B 288 mm, C 231 mm, D 6 mm, weight 5.4 kg. Features 8 inch 200 mm marine enclosure speaker Flat mount option Adjustable logo Impact-resistant and UV-resistant material Diaphragm made of polypropylene with UV inhibitors Front RGB LED lighting in the grille Optional rear RGB LED lighting via HTX RGB LOGO.1, available as HTX RGB MIT LOGO.1 White and HTX RGB C LOGO.1 Black Size 200 mm Dimensions A 225 mm, B 288 mm, C 231 mm, D 6 mm Weight 5.4 kg Woofer magnet flux ferrite with high density Tweeter magnet neodymium Technical specifications RMS power handling 100 W Peak power handling 200 W Impedance 4 Ohm Frequency response 45–25,000 Hz Depth 231 mm Tweeter diaphragm 36 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size Ø 19.7 x 3 mm Xmech ±8.5 mm D 174 mm Re 3.4 Ohm Fs 51 Hz Le 0.46 mH Vas 26.1 l Mms 30 g Cms 0.33 mm/N Bl 6.33 T*m Qts 0.78 Qes 0.82 Qms 14.7 SPL 91 dB305,07 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8 M-FL-TWThe Hertz HTX 8 M-FL-TW is an 8-inch marine enclosure speaker with a coaxial design, RGB LED lighting, and uniform coloring. The robust 316 stainless steel clamp mount is designed for round or square profile pipes and allows for quick sound alignment. The patented Q-OS² technology and an adjustable logo support flexible tower positioning. The speaker carries the Hertz Pure Marine Certified Product stamp with IP65 as well as the standards ASTM-D4329 and ASTM-B117. The configuration includes a 32 mm long-stroke voice coil woofer with polypropylene diaphragm and UV inhibitors, as well as a neodymium tweeter. Rated values are 100 W RMS, 200 W Peak, 4 Ohm, 45–25,000 Hz, 231 mm depth, and 5.4 kg weight per speaker. Xmech is ±8.5 mm, and other electro-acoustic data includes Fs 51 Hz and Qts 0.78. Features 8-inch marine enclosure speaker Coaxial design with 32 mm long-stroke voice coil (woofer) and neodymium tweeter Polypropylene diaphragm with UV inhibitors Integrated front RGB LED lighting Optional rear LED logo (HTX RGB LOGO.1) in black or white HM-RGB-1-BK radio frequency remote control for color selection and music-controlled light show 316 stainless steel clamp mount for round or square profile pipes Patented Q-OS² technology Adjustable logo for flexible tower positioning Ton-in-ton front grille Hertz Pure Marine Certified: IP65, ASTM-D4329 (UV resistance), ASTM-B117 (salt mist) Technical Specifications Size 200 mm Power handling RMS 100 W Power handling Peak 200 W Impedance 4 Ohm Frequency response 45–25,000 Hz Depth 231 mm Weight per speaker 5.4 kg Tweeter diaphragm 36 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size 19.7 x 3 mm Woofer magnet high-density flux ferrite Tweeter magnet neodymium Diaphragm polypropylene with UV inhibitors Xmech ±8.5 mm Effective diameter D 174 mm Re 3.4 Ohm Fs 51 Hz Le 0.46 mH Vas 26.1 l Mms 30 g Cms 0.33 mm/N Bl 6.33 T·m Qts 0.78 Qes 0.82 Qms 14.7 Sound pressure level 91 dB Dimensions: A 225 mm, B 288 mm, C 231 mm, D 6 mm310,05 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8H S-FL-GThe Hertz HTX 8H S-FL-G is an 8-inch marine enclosure speaker with an RMS power handling of 200 watts and a peak power handling of 400 watts. The system's impedance is designed for 4 ohms, with a frequency response covering a range from 45 Hz to 25 kHz. Both the woofer and the tweeter are equipped with ferrite magnets that have a high flux density. The diaphragm is made of water-resistant, pressed paper, while polyamide is used for the dome. Technical features include Common Motor Compression Driver technology and a FEM-optimized waveguide. An integrated, sealed crossover features a resettable semiconductor tweeter protection circuit. Features 8-inch (20cm) marine enclosure speaker Power: 200 watts RMS Power: 400 watts peak Impedance: 4 ohms Water-resistant diaphragm made of pressed paper Polyamide dome Common Motor Driver technology FEM-optimized waveguide Waterproof, acoustically transparent dust cover Long-stroke 51 mm voice coil in the woofer Integrated, sealed crossover Technical Specifications Frequency response: 45 Hz - 25 kHz Sensitivity: 98 dB SPL Mounting depth: 288 mm Dimensions (A x B x C x D): 225 mm x 308.2 mm x 231 mm x 6 mm Magnet size woofer: 140 x 62 x 22 mm Weight per speaker: 12.6 kg Xmech: 8.3 mm DC resistance (Re): 3.3 ohms Inductance (Le): 0.28 mH Equivalent volume (Vas): 10 l Moving mass (Mms): 20.5 g Compliance (Cms): 0.15 mm/N Drive factor (BL): 9 T*m584,85 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8H S-FL-SWThe HTX 8H S-FL-SW from Hertz is an 8-inch marine enclosure speaker with an RMS power handling of 200 watts and a peak power handling of 400 watts. The system operates with an impedance of 4 ohms and covers a frequency range of 45 Hz to 25 kHz. The construction includes ferrite magnets with high flux density and a water-resistant diaphragm made of pressed paper. An integrated, sealed crossover as well as long-stroke 51 mm voice coil woofers are part of the technical features. The sensitivity is rated at 98 dB SPL. The enclosure has a depth of 288 mm and a total weight of 12.6 kg per speaker. Features 8-inch (20 cm) marine enclosure speaker Power handling: 200 watts RMS Power handling: 400 watts peak Impedance: 4 ohms Common Motor Driver technology Water-resistant diaphragm made of pressed paper Long-stroke 51 mm voice coil woofer Integrated, sealed crossover Resettable semiconductor tweeter protection circuit Waterproof, acoustically transparent dust cover FEM-optimized waveguide Ferrite magnets with high flux density Polyamide dome Technical Specifications Frequency response: 45 Hz - 25 kHz Sensitivity: 98 dB SPL Depth: 288 mm Weight: 12.6 kg Woofer magnet size: 140 x 62 x 22 mm Xmech: 8.3 mm D: 166 mm Re: 3.3 ohms Le: 0.28 mH Vas: 10 l Mms: 20.5 g Cms: 0.15 mm/N BL: 9 T*m Dimension A: 225 mm Dimension B: 308.2 mm Dimension C: 231 mm Dimension D: 6 mm563,87 €*Shipping: 0,00 €Secure redirect to the provider
-
How do you convert kWh/kWp to W/m?
To convert kWh/kWp to W/m², you need to consider the following steps. First, convert kWh to watts by multiplying by 1000. Then, divide the result by the peak power in kWp to get the energy yield in watts per peak watt. Finally, divide this value by the area of the solar panel in square meters to get the energy yield in watts per square meter. **
-
How did Kafi M and Kafi W mate yesterday?
Kafi M and Kafi W mated yesterday through a process called copulation. This involves the male transferring sperm to the female's reproductive system, typically through the insertion of the male's intromittent organ into the female's cloaca. This allows for fertilization of the female's eggs, leading to potential offspring. This mating behavior is common among many bird species, including Kafis. **
-
What do the symbols M and W mean on Timberland Boots?
The symbols M and W on Timberland Boots stand for Men's and Women's, respectively. These symbols indicate the gender for which the boots are designed and sized. Men's boots typically have a wider width and larger size range compared to Women's boots. It is important to pay attention to these symbols when purchasing Timberland Boots to ensure the best fit and comfort. **
-
How can the letters w m x g x h be rearranged?
The letters w m x g x h can be rearranged in various ways. One possible arrangement could be "w x m x g x h" or "m x w x g x h". Another arrangement could be "h x g x m x w". The key is to mix up the letters while maintaining their original sequence within the rearranged set. **
Similar search terms for Hertz-HTX-8-M-FL-W
-
Hertz HTX 8 M-CL-CHTX 8 M-CL-C is an 8-inch (200 mm) marine enclosure speaker from Hertz in coaxial design with 100 W RMS, 200 W Peak, 4 Ohm, and a frequency response of 45–25,000 Hz. The clamp mount is made of stainless steel 316 and fits round pipes of 38–76 mm as well as square profiles; rubber inserts serve to dampen vibrations. Q-OS² technology allows for alignment in 18 steps of 20° each, a quick mechanical/electrical release, and a multipole high-current connection in the clamp structure. The RGB LED front lighting is integrated into the front grill; the rear RGB lighting is optional via the accessory HTX RGB LOGO.1 in black or white. An adjustable logo at the front and back can be aligned in 64 steps. The 32 mm long-stroke woofer uses a polypropylene diaphragm with UV inhibitors and a flux ferrite magnet, while the tweeter relies on neodymium with a 36 mm diaphragm and a 20 mm voice coil. Protection class IP65 as well as the standards ASTM-D4329 (UV resistance) and ASTM-B117 (salt mist) are met, the enclosure has a depth of 288 mm, and a speaker weighs 5.4 kg. Features 8-inch marine enclosure speaker Hertz Pure Marine Certified, IP65, ASTM-D4329 UV resistance, ASTM-B117 salt mist Stainless steel 316 clamp mount, for round 38–76 mm and square profiles, rubber inserts for vibration damping Q-OS² technology: 18 alignment steps of 20°, quick mechanical/electrical release, multipole high-current connection Integrated RGB LED front lighting; optional rear RGB lighting via HTX RGB LOGO.1 (black/white) Adjustable front and rear logo, 64 steps Dedicated 8-inch coaxial design: 32 mm long-stroke woofer with polypropylene diaphragm (UV inhibitors); neodymium tweeter Woofer magnet flux ferrite with high density; tweeter magnet neodymium Weight per speaker 5.4 kg Technical Specifications Size 200 mm RMS power 100 W Peak power 200 W Impedance 4 Ohm Frequency response 45–25,000 Hz Sound pressure level 91 dB Depth 288 mm Tweeter diaphragm 36 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Xmech ±8.5 mm Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size 19.7 x 3 mm D 174 mm Re 3.4 Ohm Fs 51 Hz Le 0.46 mH Vas 26.1 l Mms 30 g Cms 0.33 mm/N Bl 6.33 T·m Qts 0.78 Qes 0.82 Qms 14.7 Dimensions A 225 mm Dimensions B 288 mm Dimensions D 50 mm Dimensions G 38–76 mm Dimensions H 12 mm710,28 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8 M-CL-TCHertz HTX 8 M-CL-TC is an 8 inch marine enclosure speaker with RGB LED lighting, clamp fastening made of 316 stainless steel, and Q-OS² technology. The front RGB lighting is integrated into the grille; a rear RGB lighting is available as HTX RGB LOGO.1 add-on in black or white. The tower can be aligned horizontally in 18 steps of 20° each, the logo is adjustable in 64 steps. The clamp structure integrates a multi-pole high current connection and rubber inserts for vibration damping and fits round 38–76 mm as well as square pipe profiles. Certification according to IP65, ASTM-D4329, and ASTM-B117. Coaxial design with 32 mm long-stroke woofer with polypropylene membrane and UV inhibitors as well as neodymium tweeter. Rated power handling 100 W RMS, 200 W peak, impedance 4 Ohm, frequency response 45–25,000 Hz, depth 288 mm, weight 5.4 kg. Features 8 inch marine enclosure speaker Manufacturer: Hertz RGB LED lighting at the front of the grille; rear RGB lighting optional via HTX RGB LOGO.1 in black or white Clamp fastening made of 316 stainless steel, suitable for round and square profiles Q-OS² technology Quick Orientation & Release for Sound & Safety Horizontal alignment in 18 steps of 20° each Adjustable logo in 64 steps Multi-pole high current connection integrated in the clamp structure Rubber inserts for vibration damping Suitable for round pipes 38–76 mm as well as square pipes or roof mounting Hertz Pure Marine Certified: IP65, ASTM-D4329, ASTM-B117 Coaxial system with 32 mm long-stroke woofer, polypropylene membrane with UV inhibitors Neodymium tweeter Size 200 mm Depth 288 mm Weight 5.4 kg Power handling RMS 100 W Power handling peak 200 W Impedance 4 Ohm Frequency response 45–25,000 Hz Technical specifications Size 200 mm Power handling RMS 100 W Power handling peak 200 W Impedance 4 Ohm Depth 288 mm Woofer voice coil Ø 32 mm Tweeter voice coil Ø 20 mm Frequency response 45–25,000 Hz Woofer magnet size 90 x 40 x 20 mm Tweeter magnet size 19.7 x 3 mm Weight of a speaker 5.4 kg Woofer magnet flux ferrite with high density Tweeter magnet neodymium Membrane polypropylene with UV inhibitors Xmech ±8.5 mm D 174 mm Re 3.4 Ohm Fs 51 Hz Le 0.46 mH Vas 26.1 l Mms 30 g Cms 0.33 mm/N Bl 6.33 T·m Qts 0.78 Qes 0.82 Qms 14.7 SPL 91 dB A 225 mm B 288 mm D 50 mm G 38–76 mm H 12 mm710,28 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX 8 M-CL-TWThe Hertz HTX 8 M-CL-TW is an 8-inch (20 cm) marine enclosure speaker with a coaxial design. The model carries the Hertz Pure Marine Certified Product stamp with IP65 as well as the standards ASTM-D4329 and ASTM-B117. The power handling is 100 W RMS, the peak power handling is 200 W, the impedance is 4 Ohms, and the sound pressure level is 91 dB. The frequency response ranges from 45–25000 Hz. The Q-OS² technology includes a horizontal orientation in 18 steps of 20°, a mechanical/electrical quick release, and a multipole high-current connection integrated into the clamp structure. The 316 stainless steel clamp mount with rubber inserts fits round roll bars from 38 to 76 mm as well as square roll bars or roof mounting. Equipped with a 32 mm woofer voice coil, polypropylene membrane with UV inhibitors, neodymium tweeter (35.6 mm) with a 20 mm voice coil, RGB LED front lighting, and adjustable logo in 64 steps; depth 288 mm, Xmech ±8.5 mm, weight 5.4 kg. Features 8-inch (20 cm) marine enclosure speaker Manufacturer: Hertz Coaxial design Hertz Pure Marine Certified Product, protection class IP65 ASTM-D4329 (UV resistance) and ASTM-B117 (salt spray) Q-OS² technology (Quick Orientation & Release for Sound & Safety) Horizontal orientation in 18 steps of 20° Mechanical/electrical quick release Multipole high-current connection integrated into the clamp structure 316 stainless steel clamp mount Rubber inserts for vibration damping in the clamp structure Fits round roll bars 38–76 mm as well as square roll bars or roof mounting Tone-on-tone front grille matching the grill color RGB LED front lighting integrated into the grill Optional rear RGB LED lighting via HTX RGB LOGO.1 (in black or white) Adjustable front and rear logo, alignable in 64 steps Membrane: polypropylene with UV inhibitors Woofer magnet: high-density ferrite Tweeter magnet: neodymium Weight per speaker: 5.4 kg Technical Specifications Size: 200 mm Depth: 288 mm Impedance: 4 Ohms Power handling RMS: 100 W Power handling Peak: 200 W Frequency response: 45–25000 Hz Sound pressure level: 91 dB Effective diameter D: 174 mm Re: 3.4 Ohms Fs: 51 Hz Le: 0.46 mH Vas: 26.1 l Mms: 30 g Cms: 0.33 mm/N Bl: 6.33 T·m Qts: 0.78 Qes: 0.82 Qms: 14.7 Xmech: ±8.5 mm Woofer voice coil: Ø 32 mm Tweeter: 35.6 mm (converted from 1.4 inches) Tweeter voice coil: Ø 20 mm Woofer magnet size: 90 x 40 x 20 mm Tweeter magnet size: 19.7 x 3 mm710,28 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz HTX Clamp.1HTX Clamp.1 by Hertz is a versatile Marine Accessories for clamping attachment. The construction includes rubber inserts for vibration damping and is compatible with round poles from 38 mm to 76 mm as well as with square poles. By removing the upper part of the clamp base, roof mounting is possible. This clamp is optionally suitable for all Hertz Marine Tower speakers. The delivery includes screws from various sets, a rubber seal with an inner plate, and a replacement cable. Features Marine Accessories Manufacturer: Hertz Vibration damping through rubber inserts Compatible with round poles (38 mm to 76 mm) Compatible with square poles Roof mounting possible with removable clamp base Optional for all Hertz Marine Tower speakers Includes HTX Clamp with screw set A, B, and C Includes rubber seal and inner plate (set D) Includes replacement cable and screw set A to D401,30 €*Shipping: 0,00 €Secure redirect to the provider
-
Are 8 cats too many in an 80 m² apartment?
Yes, 8 cats would likely be too many for an 80 m² apartment. Cats need space to move around, play, and have their own territory. With 8 cats in a relatively small space, there may be increased competition for resources, potential territorial issues, and an overall decrease in the cats' quality of life. It's important to consider the well-being of the cats and ensure they have enough space to live comfortably. **
-
What is the difference between 60 Hertz and 75 Hertz?
The difference between 60 Hertz and 75 Hertz lies in the frequency of the alternating current. Hertz is a unit of frequency, and it measures the number of cycles per second. Therefore, 60 Hertz means the current changes direction 60 times per second, while 75 Hertz means it changes direction 75 times per second. In practical terms, a higher Hertz value can result in a smoother and more responsive display on electronic devices such as monitors and TVs. **
-
What is the PayPal authentication 8?
The PayPal authentication 8 is a security feature that adds an extra layer of protection to PayPal accounts. It is a two-factor authentication method that requires users to enter a unique 8-digit code in addition to their password when logging into their account. This code is typically sent to the user's mobile phone or generated by a security token. The authentication 8 helps prevent unauthorized access to PayPal accounts and adds an extra level of security to the login process. **
-
Does the 165 Hertz monitor only go up to 100 Hertz?
No, a 165 Hertz monitor does not only go up to 100 Hertz. A 165 Hertz monitor is capable of displaying refresh rates up to 165 Hertz, providing smoother and more responsive visuals compared to lower refresh rate monitors. Users can adjust the monitor settings to select the desired refresh rate, up to the maximum of 165 Hertz. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.